Home > Nickel Alloy >Nickel Alloy 201 Pipe Fittings
| Standard | ASTM B366 / ASME SB366 |
| Dimensions | ANSI B16.9, B16.25, B16.28, MSS-SP-43, MSS-SP-48, MSS-SP-59 |
| Size | 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated) |
| Type | Seamless / Welded(100% X-Ray Welded) / Fabricated |
| Thickness | Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
| Grade | Ni | Fe | C | Mn | Si | Cu | Mg | Ti | S |
| Nickel 201 | 99.0 min | 0.4 max | 0.02 max | 0.35 max | 0.2 max | 0.25 max | 0.15 max | 0.1 max | 0.01 max |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
At Koasteel, we take pride in being the largest supplier and manufacturer in the New Zealand, delivering advanced solutions for all your piping requirements. With cutting-edge production facilities strategically positioned in the New Zealand, we hold an extensive inventory of more than 25,000 tons of top-quality materials kept ready in stock.
Reach out to us for a fast quote tailored to your requirement.
These Nickel Alloy Pipe Fittings Pipes are supplied by us in accordance with DIN, ISO, JIS or ANSI Standard.
Water resistance: Nickel Alloy 201 demonstrates outstanding resistance to corrosion across a wide range of media, such as acids, alkalis, and saltwater. This quality proves especially valuable in fields like chemical processing, where corrosion takes place and can inflict serious harm on equipment and piping.
High-temperature performance: Nickel alloy 201 keeps its mechanical characteristics under high temperatures, which makes it a good fit for high-temperature uses like refineries, power plants and aerospace applications.
Low electrical resistivity: Nickel alloy 201 possesses low electrical resistivity, which makes it a perfect choice for uses that call for electrical conductivity, such as electrical and electronic components.
Thermal stability: The composite shows outstanding thermal stability and holds onto its properties even following extended exposure to elevated temperatures. This trait matters where thermal cycling or temperature fluctuations frequently occur.
Easy to manufacture: Nickel alloy 201 forms and welds readily, letting it be easily produced in a variety of shapes and sizes in pipe fittings. This straightforward manufacture aids in cutting costs and shortening lead times, and the application helps.
Superior mechanical properties: Nickel alloy 201 delivers superior mechanical properties, such as high tensile strength and durability, to guarantee dependable pipe components and durability under operating conditions, even in the most expensive.
Nickel Alloy 201 Pipe Fittings serve applications as varied as the industries that rely on them, led chiefly by the aerospace, railway, construction and automotive industries along with petrochemical, nuclear, medical, Oil & Gas, Chemical, Pharmaceutical, Food & Beverage, Nuclear, Thermal Power plants, Paper and Pulp, marine and mining, etc.
Chemical applications: Nickel alloy 201 pipe fittings are widely applied in chemical facilities that demand protection against chemical corrosion and weathering. They serve in piping, valves, and other equipment used for corrosion control . . .
conductivity: Thanks to their outstanding electrical conductivity, nickel alloy 201 pipe fittings offer benefits in electronics uses. They are employed in electronics production, primarily in circuits and wiring that call for high conductivity and corrosion resistance.
Aerospace and Safety: In aerospace and defense uses, where withstanding extreme heat and severe environmental conditions matters, Nickel Alloy 201 pipe fittings serve in hydraulic fuel systems, aircraft engines and missile components
Oil and Gas Industry: Within the nickel and gas sector, nickel alloy 201 pipe fittings are applied for corrosion resistance in surface and downstream operations. They are frequently used in pipelines, valves and other on-site equipment in destructive forms.
Marine Applications: Nickel Alloy 201 pipe fittings are utilized in marine settings such as shipbuilding, marine oil refining and water desalination owing to their resistance to seawater corrosion.
Material Compatibility: Nickel Alloy 201 is a commercially pure nickel alloy recognized for its outstanding resistance to corrosion in reducing environments. Confirm that it is likewise constructed from Nickel Alloy 201 or compatible material fittings chosen to avoid galvanic corrosion.
Pressure and Temperature Check: Review the pressure and temperature requirements of your application. Choose fittings rated for the maximum input pressure and temperature. Nickel alloy 201 generally offers good mechanical properties at both high and low temperatures, but verify that the filler satisfies your requirements.
Size and Configuration: Determine the size and configuration of the fittings required to join your pipes. Take into account factors like pipe size, wall thickness, and the type of connection needed (e.g., threaded, socket welded, butt welded). Make sure the fittings have the correct sizes and arrangement for your piping system.
Corrosion Resistance: Nickel Alloy 201 is highly corrosion-resistant, particularly in environmentally cleaning environments like sulfuric acid and alkaline solutions. Nevertheless, take into account the specific corrosive elements of your application and confirm that the fittings deliver sufficient strength to withstand them.
Construction Standards: Seek out fixtures that comply with the relevant manufacturing standards and specifications, such as ASTM, ASME, or DIN standards. Following these standards guarantees the quality, reliability, and interchangeability of inputs sourced from various manufacturers.
Email: sales@koasteel.nz
