Home > Nickel Alloy > Nickel Alloy Bars
| Nickel Bar Standard | ASTM B160, ASTM B865, AMS 5513, AMS 5511, AMS 5647 |
|---|---|
| Nickel Bar Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Nickel Round bar size | Diameter: 3-~800mm |
| Nickel Hex Bar size | 2-100mm A/F |
| Nickel Alloy Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Nickel Square bar size | 4 to 100mm |
| Alloy Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Alloy Rectangular Bars Section | 3.0 to 12.0mm thickness |
| Nickel Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| ASTM B160 Type Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Nickel Alloy Threaded Bar Billet Size | 1/2 to 495mm Diameter |
| Nickel Rectangular Size | 33 x 30mm to 295 x 1066mm |
| Alloy Hex Bars Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| ASTM B160 Type Hollow Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| JIS NW T-Bar Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Rolled Nickel Flat Bars Condition | Hardened & tempered, annealed |
| ASTM B160 Type Cold Rolled Bar Technique | Alloy Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Nickel Alloy Rod Processing | Bar cutting to 650mm |
| Alloy Rounds Bar Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|
| 8.9 G/Cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
| Grade | Ni | Fe | C | Mn | Si | Cu | Mg | Ti | S |
|---|---|---|---|---|---|---|---|---|---|
| Nickel Alloy | 99.0 Min | 0.4 Max | 0.02 Max | 0.35 Max | 0.2 Max | 0.25 Max | 0.15 Max | 0.1 Max | 0.01 Max |
| Nickel Alloy | 99.0 Min | 0.4 Max | 0.15 Max | 0.35 Max | 0.1 Max | 0.25 Max | – | – | 0.01 Max |
At Koasteel, we take pride in being the largest supplier and manufacturer in the New Zealand, delivering advanced solutions for every one of your piping requirements. With cutting-edge production facilities strategically situated in the New Zealand, we maintain an extensive inventory of more than 25,000 tons of top-quality materials kept ready in stock.
Reach out to us for a fast quote tailored to your requirement.
We supply these Nickel Alloy Bars in accordance with DIN, ISO, JIS or ANSI Standard.
Nickel Alloy Bars have applications as varied as the industries they support, led mainly by the aerospace, railway, construction and automotive sectors along with petrochemical, nuclear, medical, Oil & Gas, Chemical, Pharmaceutical, Food & Beverage, Nuclear, Thermal Power plants, Paper and Pulp, marine and mining, etc.
Yes,Nickel alloys can usually be welded and machined. That said, nickel alloys differ in mechanical properties and weldability, so it’s important to select the correct alloy and use the proper welding equipment
Yes, nickel alloy strips offer outstanding corrosion resistance and strength at high temperatures, are suited to gas production settings and can serve in natural gas applications. They withstand corrosion in corrosion-free settings and keep mechanical properties stable under high temperatures, lowering the risk of hydrogen damage. Widely used materials like Inconel, Hastelloy, and Monel are appropriate, though the selection hinges on the particular operating conditions. Following industry standards guarantees safety and compliance at natural gas facilities.
Mail: sales@koasteel.nz
