Home > Carbon Steel > Carbon Steel DIN 17175 Pipes
Locate premium-grade Carbon Steel DIN 17175 Pipe in Auckland, New Zealand, meticulously produced to boost your business’s performance. Benefit from competitive pricing, quick delivery and steadfast commitment to industry standards, guaranteeing outstanding and dependable performance across a variety of products.
| Standards | DIN 17175 St35.8 Tubes |
|---|---|
| Welded Pipe Size | 5.0 mm – 1219.2 mm |
| Seamless Pipe Size | 4 to 219mm W. T.: 0.5 to 20mm |
| EFW Pipe size | 5.0 mm – 1219.2 mm |
| Pipe Schedule | SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| Tube Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Seamless Tube Size | 3.35 mm OD To 101.6 mm OD |
| Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Welded Tube Size | 6.35 mm OD To 152 mm OD |
| Length | Single Random, Double Random, Standard & Cut length Pipe & Tube |
| Tube wall thickness | 0.020″ –0.220″, (special wall thicknesses available) |
| Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| Application | Oil Pipe & Tube, Gas Pipe & Tube, Fluid Pipe & Tube, Boiler Pipe & Tube, Heat exchanger Tube |
| Type | Welded, Seamless, ERW, EFW, Fabricated Pipe, ‘U’ bent or Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Tube etc |
| Test Certificate | Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection |
| Form | Round, Hydraulic, ‘U’ bent or Hollow,LSAW, Boiler, Straight Pipe, Clad Pipe, Rectangular, Square Pipe Etc |
| End | Plain End, Beveled End, Treaded Pipe & Tube |
| Marking | All Tubes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| We can also cut, thread, and groove Tubes to meet your specifications | |
| Standard | Grade | Chemical Composition Limits (%) | |||||
| C | Si | Mn | P、S | Cr | Mo | ||
| DIN 17175 | DIN 17175 St35.8 | ≤ 0.17 | 0.10-0.35 | 0.40-0.80 | ≤ 0.030 | / | / |
| DIN 17175 St45.8 | ≤ 0.21 | 0.10-0.35 | 0.40-1.20 | ≤ 0.030 | / | / | |
| DIN 17175 15Mo3 | 0.12-0.20 | 0.10-0.35 | 0.40-0.80 | ≤ 0.030 | / | 0.25-0.35 | |
| DIN 17175 13CrMo44 | 0.10-0.18 | 0.10-0.35 | 0.40-0.70 | ≤ 0.030 | 0.70-1.10 | 0.45-0.65 | |
| DIN 17175 10CrMo910 | 0.08-0.15 | ≤ 0.50 | 0.40-0.70 | ≤ 0.030 | 2.00-2.50 | 0.90-1.20 | |
| Standard | Grade | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) |
| DIN 17175 | DIN 17175 St35.8 | 360-480 | ≥ 235 | ≥ 25 |
| DIN 17175 St45.8 | 410-530 | ≥ 255 | ≥ 21 | |
| DIN 17175 15Mo3 | 450-600 | ≥ 270 | ≥ 20 | |
| DIN 17175 13CrMo44 | 440-590 | ≥ 290 | ≥ 20 | |
| DIN 17175 10CrMo910 | 450-600 | ≥ 280 | ≥ 18 |
At Koasteel, we take pride in being the largest supplier and manufacturer in the New Zealand, delivering advanced solutions for every one of your piping requirements. With cutting-edge production facilities strategically situated in the New Zealand, we hold an extensive inventory of more than 25,000 tons of top-quality materials kept in stock and ready to go.
Reach out to us to receive a fast quote for your requirement.
These Carbon Steel DIN 17175 Pipes are supplied by us in accordance with DIN, ISO, JIS or ANSI Standard.
Yes, Carbon Steel DIN 17175 Pipes are recyclable once their service life ends, supporting sustainable practices and the conservation of resources. Recycling these pipes reduces waste and lessens the environmental footprint of industrial operations.
Mail: sales@koasteel.nz
