Home > Carbon Steel > Carbon Steel A333 GR.8 Pipes
Explore our top-tier Carbon Steel A333 GR.8 Pipe, engineered for mechanical efficiency and resilience in low temperatures. Benefit from competitive prices, quick shipping, and compliance with industry standards for outstanding performance and dependability.
| Compositions | Data |
| Carbon(max.) | 0.13 |
| Manganese | 0.90 max |
| Phosphorus(max.) | 0.025 |
| Sulfur(max.) | 0.025 |
| Silicon | 0.13-0.32 |
| Nickel | 8.40-9.60 |
| Chromium | … |
| Other Elements | … |
| Properties | PSI (Longitudinal) | MPa(Transverse) |
| Tensile strength, min, (MPa) | 100 000 | 690 |
| Yield strength, min, (MPa) | 75 000 | 515 |
| Basic minimum elongation for walls 5/16 in. [8mm] and over in thickness, strip tests, and for all small sizes tested in full section. | 22 | — |
| When standard round 2-in, or 50-mm gage length or proportionally smaller size test specimen with the gage length equal to 4D (4 times the diameter) is used | 16 | — |
| For strip tests, a deduction for each 1/32 in [0.8 mm] decrease in wall thickness below 5/16 in [8 mm] from the basic minimum elongation of the following percentage | 1.25 | — |
At Koasteel, we take pride in being the largest supplier and manufacturer in the New Zealand, delivering advanced solutions for every one of your piping requirements. With cutting-edge production facilities strategically situated in the New Zealand, we hold an extensive inventory of more than 25,000 tons of top-quality materials kept ready in stock.
Reach out to us for a fast quote tailored to your requirement.
These Carbon Steel A333 GR.8 Pipes are supplied by us in accordance with DIN, ISO, JIS or ANSI Standard.
Yes, Carbon Steel A333 GR.8 Pipes can be recycled after use. Carbon steel is highly recyclable and can be melted down and repurposed for various applications without losing its properties. Recycling these pipes helps reduce environmental impact, conserve resources, and promote sustainability in the industry.
E-mail: sales@koasteel.nz
