Home > Inconel 625 Forging
Inconel 625 Forgingsare prized for their outstanding strength, resistance to corrosion, and long-lasting durability, which makes them well-suited for tough industrial uses. They contain nickel, chromium, molybdenum, etc. These especially adaptable alloys perform exceptionally in harsh conditions like aerospace, marine and chemical process operations, making them the top choice for critical applications.
| Inconel 625 ASTM Standard | ASTM B564, ASME SB564, AMS 5666 |
|---|---|
| Specification | DIN, ASTM, BS and all International Standards |
| Flat bar blocks | up to 27″ width and 15,000 lbs |
| Cylinders and sleeves | up to 50″ maximum O.D. and 65″ maximum length |
| Discs and hubs | up to 50″ diameter and 20,000 lbs |
| Rolled, hand forged or mandrel forged rings | up to 84″ maximum O.D. and 40″ maximum length |
| Rounds, shafts and step shafts | up to 144″ maximum length and 20,000 lbs |
| Forging Types | Impression Die Forging, Open Die Forging, Seamless Rolled Forging, Hot Forging, Cold Forging, Open die hammer forging, Impression die drop forging, Closed Die Forging, Press Forging, Upset Forging, Compression Forging, Swaging, Rotary Forging, Roll forging. |
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 625 | 0.10 max | 0.50 max | 0.50 max | 0.015 max | – | 5.0 max | 58.0 min | 20.0 – 23.0 |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 625 | 8.4g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
At Koasteel, we take pride in being the largest supplier and manufacturer in the New Zealand, delivering advanced solutions for every one of your piping requirements. With cutting-edge manufacturing facilities strategically positioned throughout New Zealand, we hold an extensive inventory of more than 25,000 tons of top-quality materials kept ready in stock.
Reach out to us for a fast quote tailored to your requirement.
Estos Inconel 625 Forging los suministramos conforme a la norma DIN, ISO, JIS o ANSI.
Inconel 625 Forging uses are as varied as the sectors they cater to, propelled mainly by the aerospace, railway, construction and automotive sectors along with petrochemical, nuclear, medical, Oil & Gas, Chemical, Pharmaceutical, Food & Beverage, Nuclear, Thermal Power plants, Paper and Pulp, marine and mining, etc.
YesYes, Inconel 625 forgings can be recycled. These high-performance alloys, made up mainly of nickel, chromium, and molybdenum, can be efficiently recovered and put back into use across a range of industrial applications. Recycling Inconel 625 helps preserve valuable resources, cut down on waste, and lessen environmental impact, promoting sustainable manufacturing and engineering practices. Correct recycling guarantees these materials are successfully reused, contributing to efficient resource management.
Email: sales@koasteel.nz
