Home > Inconel 617 Forging
Inconel 617 Forgingsare recognized for outstanding strength, resistance to oxidation and durability in high-temperature settings. Composed mainly of nickel, chromium, cobalt and molybdenum, this high-performance alloy performs exceptionally in demanding applications such as gas turbines, petrochemical processing, and power generation. Inconel 617 delivers long-term reliability and performance, and it is the preferred choice for applications that require consistent performance under extreme conditions.
| Specifications | ASTM B564, ASME SB564, AMS 5887 |
|---|---|
| Standard | DIN, ASTM, BS and all International Standards |
| Flat bar blocks | up to 27″ width and 15,000 lbs |
| Cylinders and sleeves | up to 50″ maximum O.D. and 65″ maximum length |
| Discs and hubs | up to 50″ diameter and 20,000 lbs |
| Rolled, hand forged or mandrel forged rings | up to 84″ maximum O.D. and 40″ maximum length |
| Rounds, shafts and step shafts | up to 144″ maximum length and 20,000 lbs |
| Forging Types | Impression Die Forging, Open Die Forging, Seamless Rolled Forging, Hot Forging, Cold Forging, Open die hammer forging, Impression die drop forging, Closed Die Forging, Press Forging, Upset Forging, Compression Forging, Swaging, Rotary Forging, Roll forging. |
| C | Mn | S | Si | Cr | Mo | Ni | Cu | Ti | Al | B | Co | Fe |
| 0.05-0.15 | 1.0 Max | 0.015 Max | 1.0 Max | 20.0-24.0 | 8.0-10.0 | 44.5 Min | 0.5 Max | 0.6 Max | 0.8-1.5 | 0.006 Max | 10.0-15.0 | 3.0 Max |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
At Koasteel, we take pride in being the largest supplier and manufacturer in the New Zealand, delivering advanced solutions for every one of your piping requirements. With cutting-edge production facilities strategically positioned across the New Zealand, we maintain an extensive inventory of more than 25,000 tons of top-quality materials kept in stock and ready to ship.
Reach out to us for a fast quote tailored to your requirement.
We supply these Inconel 617 Forging conforming to DIN, ISO, JIS or ANSI Standard.
Inconel 617 Forging uses are just as varied as the sectors they cater to, led mainly by the aerospace, railway, construction and automotive industries along with petrochemical, nuclear, medical, Oil & Gas, Chemical, Pharmaceutical, Food & Beverage, Nuclear, Thermal Power plants, Paper and Pulp, marine and mining, etc.
YesInconel 617 forgings are recyclable. Made up of valuable metals like nickel, chromium, cobalt, and molybdenum, these alloys can be effectively recovered and put back into use across a range of industrial applications. Recycling Inconel 617 aids in conserving resources, cutting down on waste, and lowering environmental impact, promoting sustainable manufacturing practices and effective resource management.
Email: sales@koasteel.nz
