Specifications:
Standards : EN, DIN, JIS, ASTM, BS, ASME, AISI
Size : 5 mm To 500 mm Dia in
Length : 100 mm To 3000 mm Long & Above
Specifications : ASTM B 166 / SB 166
Form :Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.
Finish :Bright, Polish & Black
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
| Grade | Ni | Cr | Fe | C | Mn | S | Si | Cu |
| Inconel 601 | 58.0 – 63.0 | 21.0 -25.0 | Balance | 0.10 max | 1.0 max | 0.015 max | 0.5 max | 1.0 max |
At Koasteel, we take pride in being the largest supplier and manufacturer in the New Zealand, delivering advanced solutions for every one of your piping requirements. With cutting-edge production facilities strategically situated in the New Zealand, we hold an extensive stock of more than 25,000 tons of top-quality materials kept readily on hand.
Reach out to us for a fast quote tailored to your requirement.
We supply these Inconel 601 Bars in accordance with DIN, ISO, JIS or ANSI Standard.
High Temperature: Inconel 601 fibres deliver outstanding resistance to elevated temperatures, which makes them well suited for high-temperature settings like furnaces, heating appliances and air filters
Oxidation resistance: This tape offers strong oxidation resistance at elevated temperatures, avoiding degradation even after extended contact with oxygenated materials
Water resistance: Inconel 601 fibres show corrosion resistance across a range of environments, including resistance to water and acids. This corrosion resistance makes them well suited for use in chemical industries and marine settings.
Creep strength: They possess good creep strength, enabling them to retain their structural integrity even under sustained stresses at elevated temperatures. This characteristic is important for applications involving continuous stresses over time, such as gas turbine components and steam generator tubes.
Temperature Stability: Inconel 601 tapes preserve their mechanical properties across a broad temperature range, delivering reliable performance under changing temperature conditions
Inconel 601 Bars serve applications as varied as the industries they support, driven mainly by the aerospace, railway, construction and automotive industries along with petrochemical, nuclear, medical, Oil & Gas, Chemical, Pharmaceutical, Food & Beverage, Nuclear, Thermal Power plants, Paper and Pulp, marine and mining, etc.
Air and Space Applications:Inconel 601 panels are being adopted in aerospace and space applications like air filters, combustion chambers, and other high-temperature uses thanks to their ability to withstand extreme temperatures and environmental conditions caused by the deterioration of the environment
Chemical applications:The corrosion resistance of Inconel 601 makes it well-suited for chemical applications like reactors, tanks and pipelines where complex chemicals and elevated temperatures are frequent. They
Heat Treating:Inconel 601 tape is employed in heat treating, where it can endure the high temperatures linked to various processes like annealing, tempering and hardening.
Power generation:Power plant applications, including gas turbines, heat exchangers and boiler systems, generally rely on Inconel 601 bars because of their resistance to high temperatures and weathering, so
Automotive Industry:Inconel 601 strips can serve in automotive components like exhaust systems and other high-temperature parts where corrosion and corrosion resistance are needed
Understand your application: Determine the exact application that requires an Inconel 601 bar. Inconel 601 is frequently applied in high-temperature settings like furnace interiors, heat treatments, and chemical processing because of its resistance to oxidation and high-temperature corrosion
Resources: Get acquainted with what your application demands. Inconel 601 offers distinctive characteristics including high thermal stability, outstanding corrosion resistance, and strong mechanical performance at both room and elevated temperatures. Verify that the pads you select satisfy these specifications.
Size and thickness: Take into account the size and thickness of the cables required for your application. Establish the size, length, and any additional dimensions needed according to your project description.
Quality and certification: Confirm that breweries comply with quality standards and hold certification. Seek out suppliers that certify listings, devices, and other pertinent details. This guarantees you are buying a high-quality bar that satisfies industry standards.
Supplier Reputation and Reliability: Select a well-regarded supplier known for quality products and excellent customer service. Investigate suppliers, read reviews, and seek recommendations from colleagues or industry experts to be sure you are working with a dependable supplier.
E-mail: sales@koasteel.nz
